1. Install the Batteries

Open the battery cover of the remote control and insert two AAA (No. 7) batteries. Make sure the “+” and “–” terminals match the markings inside the battery compartment. The spring on the battery cover should contact the negative (–) end of the battery.

2. Power On & Vibration Control

Press and hold the power button on the base of the device for 2 seconds to turn it on. The indicator light will illuminate.

Press the first button on the remote control to activate the vibration and rotating functions. Each short press changes to the next vibration mode. There are 10 vibration modes in total, and the indicator light flashes with each mode.

When the toy is in standby mode, you can also press the power button on the toy to cycle through the vibration modes.

3. Heating Function

Press the heating button on the remote control to activate the warming function.

The indicator light will remain on while heating. The heating function automatically turns off after 5 minutes. To stop heating before the timer ends, press the heating button again. To restart the warming function, press the heating button once more.

4. Power Off

While the device is operating, press the power button once to stop all functions and return the toy to standby mode (including the heating function).

Press and hold the power button for 1.5 seconds to completely turn the device off.

5. Remote Control Range

The remote control can operate the device from a distance of approximately 8–10 meters (26–33 ft) in an open area without obstacles.